AMT Pump 489G-95 High Head Washdown Pump, Cast Iron, 1 HP, 1-1/4" NPT Female Suction, 1" NPT Female Discharge Port
Save 1% on the AMT Pump 489G-95 High Head Washdown Pump, Cast Iron, 1 HP, 1-1/4'' NPT Female Suction, 1'' NPT Female Discharge Port by AMT Pumps at Breaking Faucet. MPN: 489G-95. Hurry! Limited time offer. Offer valid only while supplies last. This AMT high head straight centrifugal pump has a cast iron housing, 1-1/4'' female NPT suction ports, and 1'' NPT discharge ports. The pump housing
This AMT high head straight centrifugal pump has a cast iron housing, 1-1/4" female NPT suction ports, and 1" NPT discharge ports. The pump housing has a high-efficiency closed impeller, a fill and drain plug for easy servicing, a pull-from-rear design for servicing without disturbing any pump housing connections, a discharge port that rotates at 90-degree increments for flexible installation, and buna-n mechanical seal and O-ring. The motor enclosure is either TEFC (totally enclosed, fan cooled) for protection from dust and indirect water spray or ODP (open, drip proof) for protection from dripping water, depending on the model, and complies with National Electrical Manufacturers Association (NEMA) 56J standard for mounting dimensions. This pump requires flooded suction for priming and is suitable for continuous duty use in applications such as pressure-boosting liquid transfer and recirculation.
|Motor||1 to 1.5 hp, ODP or TEFC|
|Pump||Centrifugal, not self-priming|
|Maximum flow rate||Ranges from 53 to 58 gpm|
|Impeller||Stainless steel, high efficiency, closed|
|Suction port||1-1/4" NPT|
|Discharge port||1" NPT|
|Maximum operating temperature||180 degrees F|
|Standards met||NEMA 56J|
Pumps use mechanical action to move liquids, gases, or slurries (solids suspended in a liquid or gas). The mechanical action is categorized as either positive displacement (PD) or kinetic. PD pumps capture and release discrete amounts of flow into a chamber and then force it out. Some examples of PD pumps are fuel and oil pumps in cars, pumps in hydraulic systems, and bicycle pumps. Kinetic pumps move liquids, gases, or slurries by transferring energy from the pump's movement to the flow. They use an impeller to draw the flow in, add energy to the flow, and move it through a volute (a spiral funnel through which the flow moves), and into the system. Some examples of kinetic pumps include centrifugal (the most common pump in industrial applications), in-line pumps, sump pumps, and suction pumps. Energy sources for all types of pumps include wind power, manual operation, electricity, and gasoline or diesel fuel.
American Machine and Tool (AMT) manufactures centrifugal and diaphragm pumps. The company is headquartered in Royersford, PA.
Features & Highlights
- Closed impeller for use in pressure-boosting transfer and recirculation applications
- Not self-priming, requires flooded suction
- Cast iron with buna-n mechanical seal and O-ring
- Maximum operating temperature 180 degrees F
- 1-1/4" female NPT suction port, 1" female NPT discharge port
|Item Weight:||52.2 pounds|
|Item Size:||7.9 x 8.5 x 8.5 inches|
|Package Weight:||52.2 pounds|
|Package Size:||13.2 x 9.1 x 9.1 inches|