WAYNE SWS50 1/2 HP Cast Iron Shallow Well Jet Pump
Huge Savings Item! Save 20% on the WAYNE SWS50 1/2 HP Cast Iron Shallow Well Jet Pump by Wayne at Breaking Faucet. MPN: SWS50. Hurry! Limited time offer. Offer valid only while supplies last.
Features & Highlights
- Assembled in the US with foreign and domestic parts.
- 1/2 hp; max. Flow rate is 420 gallons per hour; (50 psi)
- 3/4 in. Npt discharge with 1-1/4 in. Suction
- Dual voltage (120V/240V) high efficiency square flange motor (factory set for 240V)
- Pressure switch is pre-set at 30-50 psi for automatic operation
- Durable cast iron volute with dedicated priming port for volute filling
- Self-priming 1/2-horsepower shallow well jet pump
- Use in wells up to 25-feet deep
- Thermal protection prevents motor overheating
- Pumps up to 384-gallons per hour at 5-foot lift
- 3-year limited warranty
|Manufacturer:||Wayne Water Systems|
|Publisher:||Wayne Water Systems|
|Studio:||Wayne Water Systems|
|Item Weight:||39 pounds|
|Item Size:||12 x 11 x 11 inches|
|Package Weight:||37.5 pounds|
|Package Size:||14.02 x 11.1 x 11.1 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Wayne, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By Liberty Pumps
mpn: LE51A, ean: 0671812101577,
Liberty Pumps LE51A is a 115V 1/2HP Automatic/Manual Submersible Sewage/Effluent Pump with 10ft quick-disconnect power cord. This Liberty Pump features a mercury-free wide-angle float switch with series (piggyback) plug for manual bypass operation. T...
mpn: CWS100, ean: 0040066105974,
The Wayne CWS100 1-horsepower shallow well jet pump is for wells up to 90-feet deep. At 50 psi it pumps up to 560-gallon per hour at 5-feet depth.Assembled in the US with foreign and domestic parts.. 1 hp; max. Flow rate is 588 gallons per hour; (50 ...
mpn: SWS100, ean: 0040066106155,
The Wayne SWS100 1-horsepower shallow well jet pump is for wells up to 25-feet deep. At 50 psi it pumps up to 558-gallon per hour at 5-feet depth.1 hp; max. Flow rate is 630 gallons per hour; (50 psi). For wells 0 ft. - 25 ft. in depth.. 3/4 in. Npt ...
mpn: GID-523082, ean: 0687752001594,
Bronze Circulator Pump 3/4-Inch SweatFlow Range: 0-10 GPM; Head Range: 0-9 Feet.. Minimum Fluid Temperature: 40F.. Maximum Fluid Temperature: 220F.. Maximum Working Pressure: 125 psi.. Connection Sizes: 3/4 Sweat.. Standard High Capacity Output-Compa...
mpn: LHB08100085, ean: 0733886744118,
Laing LHB08100085 Low Flow Circulator Pump with 6' line cord Volume control and interchangeable body Low flow provides minimal flow velocities thereby reducing the effect of pipe erosion and noise caused by vibration. Rated for temperatures to 230 de...
mpn: 009-F5, ean: 0663001049494,
Taco 00 Series Single Phase Circulating Pump. Taco 00" cartridge circulator is designed to make your job easier. Installation is quick and easy and maintenance is a snap. With no mechanical seal, the self-lubricating design provides unmatched reliabi...
mpn: LHB08100081, ean: 0733886743913,
Timer not included. Rated for temperatures to 230 degree F and line pressures to 150 PSI. Requires only 33 watts of power. Dry run cutout provided on pumps for hot water recirculation. BS 1/2-Inch - Brass inline housing with 1/2-Inch sweat fittings. ...
mpn: 0011-F4, ean: 0687752190991,
The Taco High Velocity Series 0011 Cartridge Circulator is specifically designed for high-head/medium-flow applications in large residential/light commercial closed-loop hydronic heating and chilled water cooling systems.Exclusive ACB (Anti-Condensat...
mpn: 52722512, ean: 0632514160750,
The Grundfos UPS26-99FC is a 3-speed circulator pump with built-in flow check. This model features pre-programmed usage times that help save power and incorporates an automatic resetting thermal protection that assures motor safety and longer life. S...
By Hallmark Industries
1HP, 115V/60HZ/1PH, 7 stage, 33 GPM Max, 207 feet head, Mid Intake, S.S. SHELL C.I Intake, 1-1/4” NPT discharge. Warning: This is 110V pump! Using 220V will burn the pump!Specifications: * 4" deep well submersible pump. Fits in a 4" well casing. 1 ...